Safety Measures - GREISING Clean Marker Brush-IT Bedienungsanleitung

INSTRUCTIONS FOR USE
1.3.2 Risks involved when using the unit
The unit has been built in accordance with the latest technical standards
and the recognized regulations concerning safety. In spite of this,
danger of injury to the user or a third party and/or damage to the unit or
other materials could arise during use. The unit may only be used:
• for the process previously determined
• in a perfectly safe condition
1.3.3 Guarantee and liability
Our „General Conditions of Sale and Supply" are applicable. Claims of
warranty and liability made for personal injuries and material damages are
excluded if they result from one or more of the following causes:
• incorrect use of the unit
• non - observance of instructions for use
• unauthorised structural changes on the unit

1.3.4 Safety measures

The instructions for use are to be kept near the unit and are to be passed
on by sale or exchange of the machine.
All safety and danger signs on the unit are to be clearly visible at all times.
1.3.5 Risks arising from electrical energy
• Work on the power supply is only to be carried out by the same
• The electrical equipment is to be checked regularly.
• Loose connections and damaged cables must be remedied immediately
1.3.6 Special risks arising from chemicals
Dealing with chemicals should be considered a special risk. Pay attention
to the Safety Data Sheets and the following remarks in these instructions.
• Eye protection
• Hand protection
• Clothes protection
• Breathing protection
• Accident with chemicals
electrician.
Eyes should be protected from chemicals with goggles
Put on rubber gloves before working with chemicals
Wear protective clothing before using chemicals (acid - proof apron, wor-
king coat)
Fumes arise when using chemicals. Always wear a face mask!
Should chemicals come into contact with eyes in spite of wearing
goggles, then:
• rinse the eyes with plenty of clear water
• seek medical attention.
Operation Manual Clean Marker Brush − Page 24