Safety Regulations; Correct Utilisation; Tips And Definitions; Obligations And Liability - GREISING Clean Marker Brush-IT Bedienungsanleitung

1 SAFETY REGULATIONS

1.1 CORRECT UTILIZATION
The units are intended for cleaning welded seams, for removing oxide
coating on stainless steel welded seams, for etching conductive metal
surfaces and for galvanizing small areas. The function is only guaranteed
when original parts are used. Any other or any use beyond those deter-
mined is not considered to be correct.
The manufacture cannot be held responsible for any damages resulting
from such incorrect use.
The following are also considered to be part of correct utilization:
• Compliance with instructions on use.
• Compliance with inspection and maintenance requirements.
• Use of protective clothing, especially gloves and goggles.

1.2 TIPS AND DEFINITIONS

Warning
A possibly dangerous situation which could lead to serious
injury or even death.
Warning
A possibly dangerous situation, which could lead to light
physical injury. This sign is also used as a warning for heavy
material damage.
Information
Concerning usage and other useful information.
Information
The arrow describes a following process occurring automati-
cally and / or the condition which should now be set.

1.3 OBLIGATIONS AND LIABILITY

1.3.1 Necessary qualifications of operators
Operation, maintenance and inspection may only be carried out by autho-
rised and qualified specialists. The minimum age of the operator is 18.
Authorised specialists are understood to be specialists trained by the user,
the manufacturer or the service partner.
These operators must be:
• trained in the use of the unit
• conversant with the instructions for use
• conversant with the safety equipment of the unit
• conversant with the relevant regulations (especially with accident
prevention regulations)
• authorised to use the necessary chemicals
Operation Manual Clean Marker Brush − Page 23
- -
23