Peg Perego culla elite smart Gebrauchsanleitung Seite 13

different from the original one.
• This product is compatible with original
PegPerego products.
• For information on the product's
compatibility with PegPerego
accessories/frames, visit:
www.pegperego.com
COMBINED WITH CHASSIS:
• WARNING: make sure that all the
attachment devices of the Culla
Elite Smart are correctly fixed before
using.
• WARNING: never leave the child
unattended.
COMBINED WITH STAND:
• WARNING: This product is compatible
with the following original PegPerego
products: Bassinet Stand.
• WARNING: Do not use if any part
of the stand is broken, torn or
missing.
• WARNING: only use on a firm,
horizontal level and dry surface.
• WARNING: Do not let other children
play unattended near the carry cot
and stand.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com.
Instructions for use
Using the Culla Elite Smart
1 HOOD: to lift the hood completely, pull it until it clicks.
2 To lower the hood, press down on the upper part of same
and, at the same time, lower it.
3 The hood comes with a mesh insert so that the baby can
be seen from any position.
Lift the hood segment as shown in the figure.
4 It has an insert in the front part for more shade
5 FOOT MUFF: Fit the foot muff and button it to the side.
6 The magnets can be used to fasten the foot muff to the
hood, to protect the child even more against the elements.
Just lift the foot muff as shown.
7 CARRY HANDLE: this is built into the hood. To carry the
bassinet, lift the hood (if lowered) until it clicks and hold
the handle placed above it.
• Before lifting the bassinet, ensure the built-in hood is
correctly fastened.
• Before lifting the bassinet, make sure the hood is in the
correct position for transport.
• Before unfastening and lifting the bassinet from the frame,
adjust the backrest to its lowest position (figure 10).
8 ROCKING POSITION: The base of the Culla Elite Smart has
a special shape which allows you to rock the child when it
is placed on a flat surface.
9 COT POSITION: It is possible to make the Culla Elite Smart
into a non-rocking cot by opening out the two legs under the
base.
10 ADJUSTING THE BACKREST and THE FOOTREST: with the
COMFORT SYSTEM, backrest and footrest can be adjusted
simultaneously. Pull the knob outwards (fig_a) while turning
it (fig_b) to raise or lower the backrest and the footrest.
11 FOUR SEASONS SYSTEM: as shown in the figure, it is
possible to adjust the product's air circulation from the
base in order to prevent condensation.
To create a cool, well ventilated environment (in summer),
open the holes by moving the 4 levers outwards. To limit
the entry of air (in winter), move the levers inwards.
13