Specifications; Factory Default Settings; Technical Specifications: Hbp-1320; Power Supply - Omron HBP-1320 Gebrauchsanweisung

HBP-1320-E.fm Page 30 Wednesday, June 20, 2018 4:39 PM

Specifications

Factory Default Settings

Factory default settings and backup are as shown below.
Backup
: Setting is retained even if the power is interrupted.
: Reverts to factory default setting if the power is turned off.
Setting Pressure Value
Initial Inflation Pressure Value
Auscultation Mode
Auto Power Off

Technical Specifications: HBP-1320

Main unit
Product category
Product description
Model (code)
Measurement Parameter
Dimension
Weight
Display
Protection Class
Degree of Protection
Operation Mode
MDD Classification

Power supply

AC adapter
Rechargeable battery
30
Settings
AUTO, 220, 250, 280
ON, OFF
5 min, 10 min
Electronic Sphygmomanometers
Automatic Upper Arm Blood Pressure Monitor
HBP-1320 (HBP-1320-E)
NIBP, PR
Main unit: 123 x 201 x 99 (mm) 4.84 x 7.91 x 3.90 (inch) (W x H x D)
AC adapter: 46 x 66 x 66.2 (mm) 1.81 x 2.60 x 2.61 (inch) (W x H x D)
Battery: 54 x 43.5 x 15.4 (mm) 2.13 x 1.71 x 0.61 (inch) (W x H x D)
Main unit: Approx. 0.52 kg (not including accessories and options)
AC adapter: Approx. 120 g
Battery: Approx. 0.1 kg
7 segment LCD
Class II (AC Adapter)
Internal powered equipment (when operating with battery only)
Type BF (Applied part): Cuff
Continuous operation
Class II a
Input voltage range: AC 100 V to 240 V
Frequency: 50/60 Hz
Output voltage range: DC 6 V ±5%
Rated output current: 1.6 A
Type: 3.6 V, 1900 mAh
Number of operation cycles when fully charged: 300
Measurement conditions
• New battery fully charged
• Ambient temperature of 23°C (73.4°F)
• Using M-size cuff
• SYS 120 / DIA 80 / PR 60 (Inflation setting: AUTO)
• One 5-minute cycle consisting of "cuff measurement time + wait time"
Factory Setting
AUTO
OFF
5 min
Backup