Control Functions - OHAUS Defender 3000 i-DT33P Bedienungsanleitung

EN-4
1.4.

Control Functions

Figure 1-5 i-DT33P Control Panel
Button
Primary Function On/Zero
(Short Press) If the terminal is
off, press to power
on;
If the terminal is
on, press to set
the zero point.
Secondary
Off
Function If the terminal is
(Long Press) on, press to power
off.
Menu Function Yes
(Short Press) Accepts the
current setting on
the display or
selects a sub-
menu or menu
item.
Notes:

Short Press: press less than 1 second.

Long Press: press and hold for more than 3 seconds.
.
Print
Sends the current
value to the RS232
port if the Print
Setup →
Assignment →
Demand menu is
enabled.
Units
Changes the
weighing unit.
No
Advances to the
next menu or menu
item.
Rejects the current
setting on the
display and
advances to the
next available one.
Defender 3000 Indicators
Figure 1-6 i-DT33XW Control Panel
Function Tare
Initiates an Performs a tare
application mode. operation.
Mode Menu
Changes the Enters the user menu.
application mode.
Shows a tare value in
application modes.
Back Exit
Moves back to the Exits the user menu.
previous menu
item. Aborts a calibration in
progress.
Exits when displaying
totalization result or
under and over value
in check mode.