OHAUS Defender 3000 i-DT33P Bedienungsanleitung Seite 10

EN-8
2.3.1.3 i-DT33XW
1. Turn the two knobs (circled) on each side of
the indicator to disassemble the bracket.
3. Open the rear housing.
2. Remove the six hex head bolts from the rear
housing of the indicator.
4. Close the housing and re-install the bolts after
finishing internal connections
Note: The bolts should be tightened to 2.5 N•m
(20-25 in-lb) torque to ensure a watertight seal.
Defender 3000 Indicators