DJO Donjoy IceMan CLEAR3 Bedienungsanleitung Seite 10

EN
OPERATING INSTRUCTIONS
1
Add ice to fill line inside the device .
2
Add cold water to fill line .
Place lid on the device making sure the lip in-
3
serts into the groove . Then press the lid down
to close and secure .
Connect the IceMan® hose to the cold pad
hose . To ensure a reliable connection, "snap"
4
or "click" hoses together into place so that
the fit is tight and snug .
To turn the device on, insert cord into
connection on the back of the device and
plug power supply into the wall outlet .
(To turn off the device unplug it .)
WARNING! When applying the cold pad, DO
NOT let any part of the cold pad touch your
skin . Always use with a barrier between your
5
skin and the cold pad .
Apply cold pad to patient . Refer to applica-
tion instructions provided with cold pad .
Check for moisture on the barrier between
the patient's skin and cold pad . If moisture is
present on the barrier, immediately discon-
tinue use of this device .
8