Temperature Display; Temperature Alarm; Door Alarm - Climadiff Avintage AV7XK Gebrauchsanweisung

All manuals and user guides at all-guides.com
SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from Fahrenheit to
Celsius or from Celsius to Fahrenheit, press the button for 5 seconds
SETTING THE TEMPERATURE CONTROL
The wine cooler has two temperature zones. The temperature settings of LOWER ZONE and UPPER ZONE are adjustable
with the range 5º-22ºC/40º-72ºF. It is recommended to set the LOWER ZONE to 12°-22ºC / 55-72ºF which is ideal for storing
white and red wines and the UPPER ZONE to 5-12ºC / 40-55ºF which is ideal for storing sparkling and white wines.
NOTE: The temperature set for the LOWER ZONE must always be the same or higher than that in the
UPPER ZONE. For optimal performance, the set temperature of the two zones should differ by at least
4°C.
• You can touch UP and DOWN mark to set the internal temperature for each zone. The degrees indicators will appear in
the display window marked for UPPER ZONE and for LOWER ZONE.
• When the unit is plugged in for the first time, the LED readouts will show the original temperature sets previously (the
preset temperature at the factory for UPPER ZONE is 10ºC / 50ºF and for LOWER ZONE is 16ºC / 60ºF).
• Touch the UP and DOWN mark once of each compartment to set the desired temperature.
• The temperature will increase 1°C or 1ºF if you touch the UP mark once, or the temperature will decrease 1°C or 1ºF if
you touch the DOWN mark once.
•
To view the "set" temperature in either zone at any time, touch the UP or DOWN mark of each compartment, the "set"
temperature will temporarily "flash" in the LED display for 5 seconds. Then the display shows the current inner temperature
again.

TEMPERATURE DISPLAY

During normal operation, the temperature display on the control panel shows the temperature inside the appliance. The
temperature display will flash if:
- A different temperature is being set,
- The temperature in the zone deviates by more than 5°C from the set temperature. The temperature display flashing
ensures that the temperature can not rise or fall un-noticed and impair the wine.

TEMPERATURE ALARM

An alarm will sound if the temperature in one of the zones rises or falls outside the temperature range. The relevant
temperature display will flash at the same time. The alarm will sound and the temperature display will flash:
- When you switch the appliance on, if the temperature inside the appliance is very different from the temperature set.
- When there has been a lengthy interruption to the power supply.
- When too many items have been put into the unit at one time.
- When the door is not been closed tightly.

DOOR ALARM

If the door has been left open for more than 60s, the alarm will sound.
Once the set temperature has been reached in the appliance, the alarm stops and the relevant temperature display stops
flashing. However, if the noise disturbs you, you can switch the alarm off before this if you wish by pressing the POWER key
33