Cleaning And Maintenance - cecotec Cumbia POWER INSTANT-CCINO 20 Bedienungsanleitung

ENGLISH
Milk froth
Fill the water tank (1).
Fill the tank (1) with cold, fresh milk in order to obtain optimal results (9).
Note: This device is compatible with all types of milk, including whole, skimmed, organic milk
or soy drink.
Fold out the milk tank's nozzle (8) using the lever (7). Use the milk froth knob (5) to adjust milk
froth. (5).
Press the on/off button to (16) turn the device on and preheat water. During the preheating
process, the control panel will flash.
Place a suitable cup below the milk tank's nozzle.
As soon as the device has heated up, the control panel will stop flashing. Press the milk froth
button (21), the machine will beep, and the selected button will flash.
Once the coffee is ready, the machine will beep, the control panel will light up again and the
device will automatically switch to stand-by mode.
Note: The device will remain in operation and the control panel will be lighted up for up to 30
minutes after the last operation. During this time, the cup warmer (15) keeps on heating. Once
30 minutes have elapsed, the device needs to be switched on again using the on/off button
(16) to prepare another coffee.
Note: The coffee process can be stopped at any moment by pressing the selected coffee
button again. This will switch the device to standby mode.
Coffee customization
The machine includes a customization function which allows selecting the exact amount of
coffee and milk for each coffee, saving the desired settings for future uses. The set quantities
are saved until a new quantity is set.
Espresso, double espresso, milk froth
Fill the coffee or milk tank, depending on the drink to be prepared, as it is explained in the
previous section.
Long press the selected coffee button (2 beeps) until you have the desired amount of coffee
or milk.
Only stop pressing the button when there is enough coffee or milk in the cup. Once you stop
pressing, the machine will beep 3 times indicating that this quantity has been saved.
38
Cappuccino and Latte Macchiato
In order to prepare these coffees, the process has to be repeated twice, once for the quantity
of espresso and once for the quantity of milk.
Fill the coffee and milk tank. Make sure the milk tank's nozzle (8) is folded out and that there is
a cup below the milk tank's nozzle.
Select the desired amount of milk: long press the selected coffee button (1 beep) and let go
once you have enough milk.
Select the desired amount of coffee: long press the same selected coffee button (1 beep) and
let go once you have enough coffee.
Once you stop pressing, the machine will beep 3 times indicating that this quantity has been
saved.
Setting milk froth quantity
Use the knob on the milk tank's side to select more or less milk froth. Turn the knob clockwise
for more froth and anticlockwise for less froth.
Reset to factory settings
In order to delete the coffee and milk amounts set previously and restore factory settings:
Press the on/off button (16) to switch the device off.
Press buttons (24) and (17) simultaneously and keep them held down.
Press the on/off button (16) to switch the device on again. The control panel will flash 5 limes
and the machine will beep 5 times.
Stop pressing the button. The amounts have now been reset to the factory settings.

4. CLEANING AND MAINTENANCE

Clean the milk tank (9) and the filters after every use with mild detergent and warm water or
in the dishwasher.
Rinse through the tube in the milk tank with clear hot water to remove milk residues after every
use.
If necessary, clean the water tank (2) and the drip tray (10) and the cover (11) with mild detergent
and warm water or in the dishwasher.
Regularly run the cleaning programme (see "Self-Cleaning") to clean the milk tank system as
well as the coffee spout (14) or the portafilter (12).
Wipe down the housing with a damp cloth. If necessary, use a little mild detergent to remove
more intense soiling.
ENGLISH
POWER INSTANT-CCINO 20 39