Herunterladen Inhalt Inhalt Diese Seite drucken

Factory Settings; Cleaning And Maintenance - cecotec Cafelizzia 790 Shiny Pro Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Cafelizzia 790 Shiny Pro:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 31
Note:
If the button is hold pressed too little time, the setting will not be saved.
4.
If you want to prepare a larger coffee or 2 coffees, follow the above steps and use the
2-coffee button instead of the 1-coffee one.

FACTORY SETTINGS

If you want to restore factory settings, hold pressed the 1-coffee button and the steam bu-
tton for 3 seconds. The device will beep once indicating factory settings have been restored
successfully.
DEVICE COOLING PROCESS
After steam is emitted or coffee is brewed, the device's temperature is likely to increase
significantly, which means that all of its components will become very hot as the device has
been operating at high pressure. Both of the light indicators, 1 and 2 coffees, will start blin-
king quickly, indicating the device's temperature has to be decreased.
To cool the device down:
Rotate the steam knob to the water position, the machine will start dispensing water
for a few seconds.
When the indicator lights start flashing slowly, turn the steam knob to the 0 position.
When the power light indicators remain steady on, the device is ready to use again.
Note: The coffee maker counts on an auto-off safety system that activates after 25 minutes
of non-operation.

5. CLEANING AND MAINTENANCE

Disconnect the device from the power supply and allow it to cool down completely before
cleaning.
Do not use abrasive cleaners or scouring pads as they could cause damage to the
product's surface.
Use a soft, dampened cloth to clean the outer part of the device.
Do not immerse the main body in water or other liquids.
Wash the water tank, drip tray and cup holder tray regularly.
After using the steam function, the tube must be cleaned with a cloth immediately after.
Allow steam to be released to avoid possible blockages inside the tube.
If the steam tube is clogged, use a needle to unblock the conduct.
Remove the portafilter and empty all coffee residues inside it. Then, use water and a cloth
to clean it, do not wash it in the dishwasher.
Clean all parts with water and dry thoroughly before storing it or using the device again.
ENGLISH
CAFELIZZIA 790 SHINY PRO
19

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis