Mounting The Wall Bracket - Cleanmaxx 01169 Gebrauchsanleitung

Brush adapter
Wet nozzle
Mains adapter and wall bracket (incl. mounting material)

Mounting the wall bracket

PLEASE NOTE!
■ Use the fastening material supplied to hang up the wall bracket. If you are unsure
whether the fastening material supplied is suitable for your wall, seek advice from a
specialist stockist.
■ Hang the wall bracket in a secure and solid place near a socket to which the mains
adapter can be connected.
■ Before drilling, ensure that there are no pipes or cables behind the intended drilling
point.
1. Place the wall bracket on the wall and mark the drill holes.
2. Drill holes into the wall and insert wall plugs.
3. Screw the wall bracket onto the wall.
01169_01279_01578_02223_04380_05784_08862_DE-EN-FR-NL_A5_V8.1.indb 19 01169_01279_01578_02223_04380_05784_08862_DE-EN-FR-NL_A5_V8.1.indb 19
19
The brush adapter is mounted directly on the tile nozzle. Use
the brush adapter to dust delicate objects such as picture
frames, lamp shades, keyboards, books etc.
The wet nozzle is inserted in the suction opening of the dust
bin. Use the wet nozzle to vacuum up wet dirt and small
amounts of liquids on smooth surfaces.
4. Secure the barrel plug of the mains adapter in the wall
bracket.
5. When hanging the battery-operated vacuum cleaner in
the wall bracket, the barrel plug is inserted in the connec-
tor jack.
EN
09.11.2021 17:21:25 09.11.2021 17:21:25