Cameo OPUS W5 Bedienungsanleitung Seite 20

STAND-ALONE AUTO PROGRAM (Auto Prog)
The 4 different Auto programs (Program 1 - 4) consist of pre-programmed head movements and
color changes, etc.; the speed is configured separately. Select Auto mode, as described previously
under "STAND-ALONE MODES", confirm via ENTER, select the desired Auto program via
confirm via ENTER, and now change the value for the speed from 000 to 100 via
desired. Confirm via ENTER. Press BACK repeatedly to return to the main screen.
Stand Alone
Master
512
Alone
Auto Prog
Slave
SLAVE MODE (Slave)
Select Slave mode as described previously under "STAND-ALONE MODES". Connect the slave and
master unit (same model, same software version) using a DMX cable (Master DMX OUT - Slave
DMX IN), and activate one of the stand-alone modes, Auto or Master, on the master unit. The slave
unit will now follow the master unit. Press BACK repeatedly to return to the main screen.
Stand Alone
Master
512
Alone
Auto Prog
Slave
20
000 - 005 off
006 - 040 PAN "small > big"
041 - 075 TILT "small > big"
076 - 110 PAN / TILT "small > big"
Pan/Tilt
Macro
111 - 145 PAN / TILT (invers) "small > big"
146 - 180 Circle "small > big"
181 - 215 Circle (invers) "small > big"
216 - 255 Random "small > big"
Pan/Tilt
000 - 255
Speed
Auto Prog
Program 1
512
Program 2
Program 3
Program 4
Pan/Tilt speed fast -> slow
Program 1
Speed
512
000-100
-
+
and ,
and as