Cameo OPUS W5 Bedienungsanleitung Seite 14

Input signal display
DMX mode or operating mode
DMX start address or
operating mode
Information on device model
Back to main display = press any-
where on display or ENTER
CONTROL MENU (Control)
512
SETTING THE DMX START ADDRESS (DMX Address)
Starting from the main display, press ENTER to go to the main menu. Use the
keys to select the Control menu and press ENTER. Using the
"DMX Address" menu option and confirm via ENTER. Set the desired DMX start address using
the and buttons, and confirm via ENTER (highest value depends on active DMX mode). Press
BACK 2x to return to the main display, the selected DMX start address will now be displayed
enlarged when the DMX mode is active.
Control
DMX Address
512
DMX Mode
Network
Wireless
Stand Alone
SETTING THE DMX MODE (DMX Mode)
Starting from the main display, press ENTER to go to the main menu. Use the
keys to select the Control menu and press ENTER. Using the
"DMX Mode" menu option and confirm via ENTER. Select the desired DMX mode via
confirm by selecting ENTER. Press BACK 2x to return to the main display, the selected DMX mode
is now active. You can find tables on channel assignment in the different DMX modes in these
instructions under DMX CONTROL.
14
DMX Address
001
512
-
+
Display battery status
Rotate display by 180°
Main menu
and
and buttons, now select the
and
and buttons, now select the
control
control
and and