Cameo OPUS W5 Bedienungsanleitung Seite 16

W-DMX SETTINGS (Wireless)
Starting from the main display, press ENTER to go to the main menu. Use the
keys to select the Control menu and press ENTER. Using the
"Mode" menu option and confirm via ENTER. W-DMX settings information can be found in the
following table. Confirm all changes made to the settings via ENTER.
Wireless
W-DMX OFF
ON
Operating Receiver
Transmitter W-DMX module configured as transmitter
Transmitting G3
G4S
Link Link
Unlink
Receive Reset NO
YES
STAND ALONE MODES (Stand Alone)
Starting from the main display, press ENTER to enter the main menu. Use the
to select the control menu Control and press ENTER. Using
"Stand Alone" and confirm by pressing ENTER. Now select one of the three stand-alone modes
using the and controls and confirm with ENTER.
Control
DMX Address
512
DMX Mode
Network
Wireless
Stand Alone
16
Deactivate W-DMX
Activate W-DMX
W-DMX module configured as receiver
G3 transmission standard
G4S transmission standard
Pair with W-DMX devices. W-DMX must be enabled on all de-
vices, and the pairing with a transmitter must be reset (Receive
Reset)
Unpair all devices
Do not reset transmitter pairing
Reset transmitter pairing
and
and buttons, now select the
and
and , now select the menu item
control
controls