Waste Water - ABS NIROLIFT Einbau- Und Betriebsanleitung

Waste Water

See local regulations for sewage pumping.
Technical Data
•
Pumps of the ROBUSTA and MF Series can be used in the SANISETT/NIROLIFT.
•
Pump data and safety details are given in the instruction manual supplied with the pump.
•
See control unit for data and safety details.
•
Kit installation details are given in the leaflet supplied with the kit.
Installation and dimensions of the NIROLIFT/SANISETT (in mm)
•
Installation and dimensions of the NIROLIFT/SANISETT, see Fig. 1,2,3,4,5,6
1 Synthetic tank
2 Waste-water pump ROBUSTA (not supplied with tank must be
ordered separately)
3 Bend (Accessory)
4 Upper fitting (adjustable 360°)
5 Cover plate with floor run-off and odour lock (only suitable for foot
traffic).
6 Two inlet ports DN 100/150
7 Discharge line for connection 50 mm P.V.C pipe
8 Seal to finished floor
9 Discharge line.
10 Shut-off valve (Accessory)
11 Vent/cable pipe DN 70, lead to above roof level
•
Opening of the inlet ports, see Fig. 3
•
Fitting and adjustment of the ABS float switch KS, see Fig. 4
•
Mounting of the upper fitting, see Fig. 5
•
Mounting of the above ground upper lid, see Fig. 6
We reserve the right to make alterations in the furtherance of technical development.
ABS Production Wexford Ltd., Clonard Road, Wexford, Ireland. Telephone (053) 63200. Fax (053) 42335
www.absgroup.com
All manuals and user guides at all-guides.com
Installation, Maintenance and Service by
3
12 Cable inlet, odour-tight
13 Socket
14 Concrete
15 Screed
16 Floor tiles
17 Motor connection cable
18 Branch pipe (T-piece)
xx Sewer back wash level
1) Anti-siphon loop
--- Approximate excavation dimensions
* Cable ties
** Installation cover (on completion replaced by 5)