Trigger Mode - STEINEL US 360 COM1 Handbuch

DualTech COM1 / COM2 / DIM
DIP 6 / 7 / 8

Trigger mode

The trigger mode enables the user to choose which sensing technologies should be used
to initially turn the load on and which technologies are required to keep it on. The following
settings are possible:
Both: Requires movement recognition by PIR and US
Either: Requires movement recognition by PIR or US
PIR: Requires movement recognition by PIR
US: Requires movement recognition by US
Inital occupancy:
Sensor technology used to turn the load on (PIR, US, Both, Either)
Maintain Occupancy:
Sensor technology used to keep the load on after initial occupancy (PIR, US, Both, Either)
The trigger mode is selected by DIP switches 6, 7 and 8.
ON / OFF
TEST CONST.
MODE OFF
MANUAL
1 2 3 4 5
on
NORMAL AUTO CONST.
MODE ON
ON
Trigger mode
Initial presence
options n
Option 1 Both
Option 2 Both
Option 3 PIR
Option 4 US
Option 5 (factory setting) Either
Option 6 US
Option 7 PIR
Option 8 Either
6 7 8
TRIGGER MODE
Maintain DIP DIP
presence: 6 7
Either OFF OFF
Both OFF OFF
Either OFF ON
Either OFF ON
Either ON OFF
US ON OFF
PIR ON ON
Both ON ON
- 24 -
Functions – Settings by potentiometer
COM 1 + COM 2
Potentiometer e
Twilight setting
The chosen response threshold
can be infinitely varied from ap-
prox. 10 – 1000 lux.
Examples of use
Night-time mode
Corridors, foyers
Stairs, escalators, moving walkways
Washrooms, toilets, switchrooms, canteens
Sales floor, kindergartens, nursery school rooms,
sports halls
Work rooms: offices, conference and meeting
rooms, precision assembly activities, kitchens
Working areas requiring good light:
Laboratory, technical drawing, precision work
Daylight mode
Note: Depending on the site of installation, the setting may need to be corrected by 1 – 2 marks on the scale.
The light level is measured at the sensor.
Potentiometer f
Time setting
Stay-ON time for switching
output 1
Setting 30 sec. – 30 min.
Pulse mode (except DIM)
If the dial is set to (fully an-
ti-clockwise), the unit is in pulse
mode, i.e. the output is switched
DIP
ON for approx. 2 sec. (e.g. for stair-
8
OFF
ON
IQ-Modus
OFF
Turned fully clockwise: The stay-
ON time is self-learning and ad-
ON
justs dynamically to user behav-
OFF
iour.
ON
OFF
ON
Control dial turned fully clockwise: Depending on the site of installa-
MAX daylight mode tion, the setting may need to be
Control dial turned fully corrected by 1-2 marks on the
anti-clockwise: MIN night mode scale.
Light-level settings
min
1
2
3
4
5
>=6
max
The chosen stay-ON time is in- brated after 3 min. When the
finitely variable from a minimum threshold is exceeded, the sensor
of approx. 30 sec. to a maximum switches OFF after the stay-ON
of 30 min. Intrinsic light is cali- time expires.
well lighting timer). Afterwards, cause of dazzle by light from exter-
the sensor does not react to move- nal sources.
ment for approx. 8 sec. Day mode
is the only mode possible here be-
The optimum time cycle is deter- The shortest time is 5 min., the
mined by means of a learning al- longest 20 min.
gorithm.
- 25 -