Cleaning Before Use - hanseatic HFD20070EWDI Gebrauchsanleitung

5. Level out any unevenness on the ground
using both of the front screw feet (10).
About climate categories
• Always ensure the prescribed ambient temperature is maintained (see „Intended use" on
page EN-4).
Climate category means that the appliance is intended for operation at the specified ambient
temperature.
Zone designation
extended temperate zone
temperate zone
subtropical zone
tropical zone
If the room temperature drops significantly below this, the appliance will not switch on as often.
This indicates that an unwelcome increase in temperature may occur.
6. Tilt the appliance backwards slightly and
screw/unscrew the screw feet.
7. Repeat the adjustment until the applian-
ce is upright and secure. The appliance
(10)
should not wobble when opening the
doors.

Cleaning before use

(10)
In order to remove the odour which is present
in all new appliances, wipe the fridge and free-
zer out prior to first use with a solution made
from 100 ml vinegar and 200 ml water. Then
wipe it out with clean water and dry all of the
parts off afterwards.
Code Definition
SN This cooling appliance is designed for use at ambient
temperatures of +10 °C to +32 °C.
N This cooling appliance is designed for use at ambient
temperatures of +16 °C to +32 °C.
ST This cooling appliance is designed for use at ambient
temperatures of +16 °C to +38 °C.
T This cooling appliance is designed for use at ambient
temperatures of +16 °C to +43 °C.
Page EN-29
Start-up