Reset All Values With The Calibration Device (Reset) - Balluff BTL7-A/E501-M Serie Betriebsanleitung

BTL7-A/E501-M _ _ _ _ -A/B/CD/Y/Z(8)-NEX-S32/KA _ _
Micropulse Transducer - Rod Style
10

Reset all values with the calibration device (reset)

NOTICE
Interference in function
Resetting all values while the system is running may
result in malfunctions.
► Stop the system before performing the reset.
The reset function can be used to restore all the settings to
the factory settings. For a reset the magnet may also be located
outside the measuring range.
Activate reset
► Simultaneously press
► Release buttons.
⇒ Reset is activated.
Reset
Œ ‚
► Press
and for at least 4 s.
► Release buttons.
⇒ All values are reset.
⇒ Current position value is displayed.
⇒ Reset is deactivated.
Abort reset
Resetting can be aborted without any changes
being saved after the Activate reset step.
Œ ‚
► Briefly press and
► Release buttons.
⇒ Current position value is displayed.
24 english
Œ ‚
and for at least 4 s.
simultaneously (< 1 s).
LED legend:
LED display
LED1 LED2
1 2
> 4 s
1 2
> 4 s
1 2
< 1 s
LED not on
LED green
LED flashing green-red LED 1 and LED 2 flashing green-red simultaneously
Ignition protection
"nA" and "tb"