Herunterladen Inhalt Inhalt Diese Seite drucken

Installation And Connection; Installation Guidelines; Preparing For Installation - Balluff BTL7-A/E501-M Serie Betriebsanleitung

Micropulse wegaufnehmer-bauform stab
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
BTL7-A/E501-M _ _ _ _ -A/B/CD/Y/Z(8)-NEX-S32/KA _ _
Micropulse Transducer - Rod Style
4

Installation and connection

4.1

Installation guidelines

Non-magnetizable material
Non-magnetizable material
Magnet
1) min. Ø D2 = Minimum diameter of the bore (see Tab. 4-1)
Fig. 4-1:
Installation in non-magnetizable material
Magnetizable material
If using magnetizable material, the transducer must be
protected against magnetic interference through suitable
measures (e.g. spacer ring made of non-magnetizable
material, a suitable distance from strong external magnetic
fields).
Magnet
Spacer ring made of non-magnetizable
material
Magnet
Spacer ring made of non-magnetizable
material
1) Min. Ø D2 = Minimum diameter of the bore (see Tab. 4-1)
Fig. 4-2:
Installation in magnetizable material
Rod diameter
10.2 mm
8 mm
12.7 mm
Tab. 4-1:
Bore diameter if installed in a hydraulic cylinder
www.balluff.com
Bore diameter D2
At least 13 mm
At least 11 mm
At least 18 mm
4.2

Preparing for installation

Installation note: We recommend using non-
magnetizable material to mount the transducer and
magnet.
Horizontal assembly: For horizontal assembly with
nominal lengths > 500 mm, support the rod and tighten it
at the end if necessary (only possible with a diameter of
10.2 mm and 12.7 mm).
Hydraulic cylinder: If installed in a hydraulic cylinder,
ensure that the minimum value for the bore diameter of the
support piston is complied with (see Tab. 4-1).
Mounting hole: The transducer comes with an M18×1.5
(ISO), M22×1.5 (ISO) or 3/4"-16UNF (SAE) mounting
thread. Depending on the version, a mounting hole must
be made before assembly.
Fig. 4-3:
Mounting hole M18×1.5 per ISO 6149 O-ring 15.4×2.1
Fig. 4-4:
Mounting hole 3/4"-16UNF per SAE J475 O-ring 15.3×2.4
2.4+0.4
Fig. 4-5:
Mounting hole M22×1.5 per ISO 6149 O-ring 19.3×2.2
Magnet: Various magnets are available for the BTL7
transducer (see Accessories on page 27).
Ignition protection
"nA" and "tb"
english
11

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Btl7 -cd-nex serie

Inhaltsverzeichnis