HMM Diagnostics smart LAB Bedienungsanleitung Seite 63

• The smartLAB
spill it, wash your clothes with soap and water.
• Close the bottle tightly after use.
• Left over control solution should not be added back into the
control bottle.
• Store the bottle of smartLAB
temperature, below 30°C (86°F). Do not freeze nor refrigerate.
• If you would like to purchase smartLAB
please contact your local dealer.
Running a smartLAB
Please make sure you have all necessary items at hand when run-
ning a control solution test. You need the smartLAB
ter, a smartLAB
1. Put a test trip into the
meter as the direction
of the arrow on the test
strip. The meter turns on
automatically.
® nG control solution can stain clothing. If you
nG control solution test
®
nG test strip, and smartLAB
®
2. Press the left button to set
button to confirm the setting.
Select CD Mode here.
® nG control solution at room
(PC) or CS Mode, then press right
nG control solutions,
®
® sprint nG me-
® nG control solution.
(AC),
63