Setting Time And Date - HMM Diagnostics smart LAB Bedienungsanleitung

Setting Time and Date

Setting the current time and date in your meter is important if you
use the meter memory.
1. Press the right button to turn the meter
on.
2. The display shows the last 2-digit of the
year that flashes at the top of display as
well. Press the left button to adjust the year
and press the right button to confirm the
setting.
3. Repeat step 2 to set date and time. The
flashing field is the one you are currently
setting. (A=AM, P=PM)
Note: AM means the time from 00:00 o'clock until 12:00 o'clock. PM
means the time from 12:00 o'clock until 24:00 o'clock.
59