Levelling The Machine; Securing The Machine; Electrical Connection - Miele PWM 920 Installationsplan

To guarantee the stability of the washing machine, make sure that

the concrete plinth is sufficiently stable on the floor and that it is
capable of withstanding any burden or force from the washing ma-
chine.
The washing machine must be secured to the concrete plinth using

the fixtures and fastenings supplied.
 The washing machine must be secured to the plinth immedi-
ately after installation!
There is a risk of the washing machine falling off a raised plinth dur-
ing a spin cycle if it is not secured.

Levelling the machine

Align the washing machine vertically and horizontally using the ad-

justable feet and a spirit level.
The washing machine must stand evenly and horizontally on all four
feet to ensure trouble-free and energy-efficient operation. Otherwise
the water and energy consumption increases and the washing ma-
chine might move around.
After aligning the machine, tighten the lock nuts by turning them in

an counterclockwise direction with a wrench. This will prevent the
feet from adjusting themselves.

Securing the machine

The feet of the washing machine must be secured to the concrete

plinth using the fixtures and fastenings supplied.
Fittings supplied are for installation on a concrete floor. For other
types of flooring, please purchase suitable fastening materials sep-
arately.

Electrical connection

The electrical connection must only be carried out by a qualified
electrician who must ensure that all electrical work is carried out in
accordance with applicable electrical regulations and standards
(BS 7671 in the UK).
en - Installation and planning notes
23