Functional Description; Intended Use - Bosch PST 700 PE Originalbetriebsanleitung

Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is
fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
where.
Products sold in AUS only: Use a residual
current device (RCD) with a rated residual
current of 30 mA or less.
Safety Warnings for Laser Machines
(PST 800 PEL/PST 900 PEL)
Caution – The use of other operating or
adjusting equipment or the application
of other processing methods than those
mentioned here, can lead to dangerous
radiation exposure.
Never make warning signs on the machine
unrecognisable.
Laser radiation class 2M
Do not stare into the laser beam
yourself or view directly at it
with optical instruments.
Do not direct the laser beam at
persons or animals and do not
stare into the laser beam your-
self. This power tool produces
laser class 2M laser radiation ac-
cording to IEC EN 60825-1. A di-
rect look into the laser beam, especially with op-
tically converging instruments such as
binoculars etc., can cause damage to the eye.
Bosch Power Tools
All manuals and user guides at all-guides.com

Functional Description

Intended Use

The machine is intended for making separating
cuts and cut-outs in wood, plastic, metal, ce-
ramic plates and rubber while resting firmly on
the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw
blade recommendations are to be observed.
Do not use the laser viewing glasses as safe-
ty goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Do not allow children to use the power tool
without supervision. They could uninten-
tionally blind other persons.
The laser module must be removed from the
power tool when used for stationary work
or when sawing from below a workpiece.
One can easily be blinded from the laser
beam when carrying out such work.
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
1 609 929 N32 | (10.12.08)
English | 21