Test; Dmx-Controlled Operation - EuroLite LED THA-250F COB Bedienungsanleitung

Clear last
With this function, you can clear the individual running time of the device (last run time). Please enter the
password under "Timer PIN" first.
Temp. Info
With this function, you can display the inner temperature in degrees Celsius or degrees Fahrenheit.
Error. Info
With this function, you can display error messages.
Model. Info
Within this function, you can display the type designation.
Software version
With this function, you can display the software version of the device.

Test

Reset. M
With this function, you can reset the device via the Control Board.
If "Focus" appears under Error.Info in the main menu, then please search for Reset.M in the main menu.
While in this menu point and after the ENTER button is pressed, the device performs a reset.
Panel.Ctrl.
With this function, you can adjust the focus manually (000-255).
Calibrate
With this function, you can calibrate the focus to the correct position. The password for this function is „050".

DMX-CONTROLLED OPERATION

You can control the devices individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the LED THA-250F COB Theater Spot will respond to the controller.
Setting the DMX Starting Address:
Press the MODE button until the display shows Set Address. Press the ENTER button. You can select the
desired DMX address via the UP or DOWN buttons.
Confirm your choice by pressing ENTER.
Please, be sure that you don't have any overlapping channels in order to control each LED THA-250F COB
Theater Spot correctly and independently from any other fixture on the DMX-chain. If several LED THA-250F
COB Theater Spots are addressed similarly, they will work synchronically.
Controlling:
After having addressed the LED THA-250F COB Theater Spot, you may now start operating it via your
lighting controller.
Note:
After switching on, the device will automatically detect whether DMX 512 data is received or not. If there is
no data received at the DMX-input, the display will flash.
30/34 00092680, Version 1.0