Herunterladen Inhalt Inhalt Diese Seite drucken

Measuring Blood Pressure - Beurer medical BC 16 Gebrauchsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
setting date and time
It is vital to set date and time. Only in this way is it possible
to save and subsequently retrieve your measured values
with the right date and time.
Press the
key and
the
and
in turn to adjust the date, hour, minute and
confirm the entry.
The time is being displayed in 12-hour format, which means
a time from 13:00 onwards is being displayed as „pm 1:00".

5. Measuring blood pressure

Positioning cuff
• Bare your left wrist, making sure that the circulation in the
arm is not restricted by any clothes etc. that are too tight.
Position the cuff on the inside of your wrist.
• Fasten the cuff with the Velcro fastening so that the upper
edge of the monitor is positioned approx. 1 cm below the
ball of your thumb.
• The cuff has to be fitted tightly around the wristbut should
not constrict it.
All manuals and user guides at all-guides.com
to adjust the month. Then press
Important: The instrument should only be operated with the
original cuff.
Correct posture
• Rest for approx. 5 minutes before each measurement.
Otherwise there may be divergences.
• You can perform the measurement ei-
ther sitting or lying down. It is essential
to support your arm and have it at an
angle. Always make sure that the cuff
is level with your heart. Otherwise there
may be serious divergences. Relax
your arm and the palms of your hands.
• In order not to distort the result, it is important to keep still
during the measurement and not talk.
select memory
You have two memories (50 memory spaces each) in order to
save the test results of 2 different people separately, or else
save measurements in the morning and evening separately.
Select the required memory space by pressing the user se-
lection button
Measuring blood pressure
• Put on the cuff as described previously and assume the
position in which you want to carry out the measurement.
• Press the „User-Switching key"
ry zone, and press the
14
• • • • • • • • • • • • •
.
to select a memo-
key 2x to start measurement in

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis