Miele PTD 901 Anschlussplan Seite 7

Location of connections on the machine
Item Name
A Connection for drain hose
TWW Water connection G ¾"
EZ Entry for mains cable (inside the machine approx. 1.7 m is needed for laying and connecting the mains cable)
LAN Socket RJ45 for patch cable CAT.7 (optional)
PPE Connection for on-site equipotential bonding system
DOS1 Connection for rinse aid hose
DOS2 Connection for detergent hose
ext. DOS Connection for external dosing devices
DT / RA Connection for suction tubes (DT: detergent / RA: rinse aid)
ext. EM Connection for external energy management system
Accessories
flexible inlet water hose; connect to point
TWw
G 3/4"
1500 mm
Suggestion for the on-site installation points
The exact dimensions must be determined, taking into consideration the local conditions. The dimensions of the machine can be found
on page 1.
Subject to technical alterations
flexible drain hose; connect to point A
G 3/4"
1500 mm
Dirt trap; install between the water stop cock
and the inlet water hose
| |
12020530; 2021-09
G 3/4"
G 3/4"
7