Introduction; Device Description; Scope Of Delivery - Scheppach HCE2000 Original Bedienungsanleitung

1. Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating
manual before installing and commissioning the de-
vice.
This operating manual should help you familiarise
yourself with your power tool and teach you how to
use it for its intended purpose.
The operating manual include important instructions
for the safe, proper and economic operation of the
power tool, for avoiding danger, for minimising repair
costs and downtimes and for increasing the reliability
and extending the service life of the power tool.
In addition to the safety instructions in this operat-
ing manual, you must also observe the regulations
applicable to the operation of the power tool in your
country.
Keep the operating manual package with the power
tool at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work. The power tool may only be used
by personnel who have been trained to use it and
who have been instructed with respect to the asso-
ciated hazards. The required minimum age must be
observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
18 | GB
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1)
1. Handle with hose reel
2. Crank handle
3. High-pressure hose
4. Cable holder
5. On/off switch
6. Connection for high-pressure hose
7. Lance holder
8. Cleaning agent container
9. Transport wheel
10. Water supply connection
11. Nozzle cleaning needle
12. Screws
13. Nozzle
14. Turbo nozzle
15. Extension piece
16. Pistol

3. Scope of delivery

• Handle with hose reel
• High-pressure hose
• Cable holder
• Lance holder
• Cleaning agent container
• Water supply connection
• Nozzle cleaning needle
• Screws (2x)
• Nozzle
• Turbo nozzle
• Extension piece
• Pistol
• Operating manual
Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the
packaging and transport safety devices (if pre-
sent).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for trans-
port damage.
• If possible, keep the packaging until the expiry of
the warranty period.
ATTENTION
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of chok-
ing or suffocating!
www.scheppach.com