General Information - Saeco Aulika SUP040R Installations- Und Bedienungsanleitung

CONTENTS

1 GENERAL INFORMATION ...................................... 9

1.1 General Description......................................................9
1.2 To Simplify Manual Reading.........................................9
1.5 Technical Specifi cations ...............................................9
1.6 Residual Risks ..............................................................9
2 KIT COMPONENTS (FIG.1) .................................... 9
2.1 Kit installation .............................................................9
3 PROGRAMMING ................................................ 10
4 USING THE MACHINE ......................................... 11
5 DESCALING ....................................................... 11
1 GENERAL INFORMATION
1.1 General Description
This kit makes the Aulika machine suitable for water network
connection.
Important.
Misuse voids all forms of warranty, releasing the
Manufacturer from any responsibility for damage to
persons and/or property.
The following are considered misuse:
- any use other than the intended use and/or employing
methods other than those described in this manual;
- any operation on the machine in breach of the
instructions provided in this manual;
- any use following tampering with machine
components and/or alteration of its safety
mechanisms;
- use of the machine outdoors.
In such cases the user shall bear the costs of repair.
Machine Installation - Service Provider Manual
1.2 To Simplify Manual Reading
Various kinds of symbols are used in this manual to highlight the
diff erent hazard or competence levels.
Carefully follow these instructions to avoid serious injury!
This symbol is used to highlight information that
is particularly important to ensure optimal use of
the machine.
1.5 Technical Specifications
For specifi cations not stated herein, please refer to the operation
and maintenance manual supplied with the machine.
Water Connections (for water network version only)
maximum pressure 0.8 MPa (8 bar)
minimum pressure 0.15 MPa (1.5 bar)
Subject to engineering and manufacturing changes due
to technological improvements.
1.6 Residual Risks
The dispensing outlet has no guards to prevent accidental hand
contact with coff ee, hot beverages and/or steam.
2 KIT COMPONENTS (FIG.1)
The kit features only the following components.
A Back lid with water network connection.
B No. 1 - Braided hose for pressurised water
C No. 2 - Water fi ttings
D No. 3 - Metal clamps
E No. 1 - Transparent silicone hose
2.1 Kit installation
Warning! Before installing the kit, turn off and
unplug the machine from the mains. Wait for the
machine to cool down.
(Fig.2) - Place the machine in a comfortable, accessible and
1
safe position.
The warning triangle indicates
important instructions for the
safety of the machine's users.
Technical Specifi cations
• 9 •