Installation; General Preparation - Dovre Sense 103 Einbauanleitung Und Gebrauchsanweisung

Door lock
The appliance is supplied with the latch button (4)
installed. The door is opened by pressing in the latch
button. As the latch button becomes warm during use,
a glove has been supplied which you can use to pro-
tect your hand.

Installation

General preparation

Please check the appliance immediately after deliv-
ery for damage during transport or any other dam-
age or defects. The appliance is attached to the
pallet with screws at the bottom.
If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
Remove removable parts (fire-resistant inner
plates, fire grate, top plate, ashtray) from the appli-
ance before starting installation.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
Subject to change because of technical improvements
1. Open the door; see the following figure:
2. Remove the fire-resistant inner plates; see the fol-
1
2
3
09-20021-011
lowing figure:
a. First remove the baffle plate (09).
The baffle plate is attached at the top with a
metal clip. This is to avoid damage during
transit.
b. Remove the inner plates (10), (11), (07) and
(08) at the side and at the back.
c. Remove the fire basket at the side (02) and
(03) and at the front (04), (05) and (06).
d. Remove the grate and the ash pan (01) and
(12).
Vermiculite inner plates are light and tend
to be ochrous in colour on delivery. They
insulate the combustion chamber to boost
combustion.
09-20021-012
13