Technical Data; How To Use - Anslut 014659 Bedienungsanleitung

device that has a maximum
tripping current of 30 mA.
• Do not store gas cylinders or
flammable liquids, such as
paint or petrol, near the
product. Do not use the
product in an explosive
environment, e.g. near
flammable liquids, gas
cylinders, spray cans etc. –
risk of fire or explosion.
WARNING!
• Some parts of the product
get very hot – risk of burn
injuries. Keep the product
under careful supervision
when it is used by, or near
children or persons with
functional disorders.
• The product does not have a
thermostat.
• Do not use the product
unsupervised in small
rooms where there are
persons who cannot leave
the room without
assistance.
• Do not cover the product,
this can result in
overheating.
SYMBOLS
Read the instructions.
WARNING!
Do not cover.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
WARNING!
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.

TECHNICAL DATA

Rated voltage
Output
Safety class

HOW TO USE

1. Plug the plug into the power point.
2. The product has two power levels: I = 450
W and II = 900 W.
EN
230 V ~ 50 Hz
450/900 W
IP24
25