Crosscall CORE-M5 Bedienungsanleitung Seite 76

X-SAFE
X-SAFE is a CROSSCALL app that allows you to quickly and easily raise the alarm in the
event of an emergency.
Step 1: Configuring X-SAFE
1. Open the X-SAFE app. It is enabled on your phone by default.
2. Enter the relevant information: your name and address
3. Then enter the emergency number(s) you would like to contact when you are in need:
a. Click on Trigger emergency call
b. Click on the 3 little dots at the top right of your screen.
c. Click on Select a contact if the number is already saved in your contacts, or on
Enter phone number if you want to add a number that is not already saved in your
phone.
If you decide to include several numbers in this app, in an emergency the phone
will call the numbers in the order in which you added them. To change this order,
you will need to delete the numbers (by clicking on the green arrow) and save them
again in the new desired order.
4. You can then choose between two different options to notify your loved ones in
the event of an emergency. You can also combine and activate these two options
simultaneously
a. If you want to send an emergency message: enable Send emergency message
and click on it to enter the content of the message you want to send.
b. If you want to make an emergency call: Enable Trigger emergency call
5. You can also configure some of the app features by clicking on Parameter settings:
a. Enable/Disable LED flashing
b. Enable/Disable the audible alarm
c. Enable/Disable the loudspeaker
76