In The Process Of Operation - Kuppersberg RMW 963 Technischer Pass

TECHNICAL PASSPORT
Microwave Oven
IN THE PROCESS
OF OPERATION...
Pause
You can stop the process of cooking
at any moment by a single touch of
STOP control or by opening the oven
door.
In both cases:
 Microwave radiation is instantly
terminated.
 The grill heating element stops
operating, but remains hot. Burn hazard!
 The timer is stopped, and the
display shows time remaining to the
end.
Now you can:
1. Turn over or move the products to
ensure that they are evenly cooked.
2. Adjust cooking parameters.
3. Cancel cooking by touching STOP.
To resume the process of cooking,
close the oven door and touch START.
Adjustment of Parameters
Cooking parameters
weight, power...) can be adjusted in the
process of cooking or during a pause
using the following steps:
1. Adjust the duration of cooking
using - and + controls. The new set value
is instantly effective.
2. To adjust power, touch SET POWER
control. The display and the relevant
indicator start flashing. Adjust power
using - and + controls and confirm your
choice by touching SET POWER control
again.
50
Cancel
If you want to cancel cooking, touch
and hold STOP control for 3 seconds.
The oven beeps and the display shows
current time.
End
Once cooking is completed, the oven
generates three beeps, and the display
shows 'End' .
The beeps are repeated every 30
seconds, unless you open the oven door
or touch STOP.
(duration,
ENGLISH