Hot Water - Beko CEG 3192 B Bedienungsanleitung

5
Operation
5.5 Preparing Frothy Milk for Coffee
As the temperature of steam is higher than the temperature of espresso, the espresso should
be prepared before making frothy milk. Otherwise the espresso might get burnt.
Prepare the espresso coffee with a lar-
ger cup. Turn the steam nozzle toward to
the Drip tray.
After the usage of steam nozzle, please clean the nozzle from the milk residue by wiping away
the nozzle with a wet rag.
It is recommended to remove any milk residue that may accumulate at the tip of the nozzle by
activating hot water function from the nozzle.

5.6 Hot Water

The appliance can dispense hot water by simply pressing the hot water button. The hot water button
and the illumination lit up indicates that the appliance is heating up the water. When the hot water
button and the illumination turn off, the water is ready to serve.
5.7 Mode Selection
The machine has three different settings: the default setting, ECO mode and speed mode. In ECO mode,
the appliance saves more energy. In speed mode, the user can make their coffee faster than in the
default setting.
16 / EN
Press the steam button. The steam indi-
cator light will flash. Then the appliance
will heat up and drain the residual water
into the Drip Tray or another container.
After the steam indicator light stops
flashing and stays steady, place a con-
tainer with milk under the steam nozz-
le and immerse the steam nozzle abo-
ut 5cm deep into the container. Swivel
the container while the hot steam co-
mes out.
Fully Automatic Coffee Machine / User Manual
Pour the hot frothy milk into the espres-
so. Now you can enjoy your coffee!