Manual Station Scan; Scan Setting - TechniSat DIGITRADIO UP 55 Bedienungsanleitung

10.4 Manual station scan

> Briefly tap on << or >> repeatedly to set the desired station or frequency.
The display shows the frequency in steps of 0.05 MHz.

10.5 Scan setting

In this menu item it is possible to set the sensitivity of the scan.
> Open the main menu. Use the << or >> touch fields to select the [Scan Settings]
menu item, then tap on OK/NAV.
> Use << or >> to select whether the scan should only stop for stations with a
strong signal [Strong Stations Only] or for all stations (including stations with a
weak signal) [All Stations].
With the All Stations setting, the scan stops automatically upon detecting each
available station. This can result in weak stations being played with background
noise.
DE
EN
FR
NL
93