Respekta GKE 178 NA++ N Einbauanleitung Seite 28

Door Reversal
5. Flip over the upper hinge 180° (so the pin is pointing upwards) and fix on to the
opposite side at the bottom of the appliance. Place the freezer door back on to the
lower hinge.
6. Flip over the middle hinge (by 180°) and put the hinge pin into the middle hinge
(ensuring the fixed washer is at the top) and place the bottom part of the pin into
the top of the freezer door. Put the fastening connector on the hinge and screw
the middle hinge and fastening connector back onto the opposite side the fridge.
You must ensure the freezer door is aligned horizontally and vertically, so that
the seals are closed on all sides before finally tightening.
Fixed
washer
.
13