Replacing The Light - Respekta GKE 178 NA++ N Einbauanleitung

Door Reversal
7. Place the fridge door back on to the middle hinge, flip the lower hinge 180° (so
the pin is pointing downwards) and put the pin of the hinge into the top of the
door and fix it in to place. Ensure the fridge door is aligned horizontally and
vertically so that the seals are closed on all sides before finally tightening the top
hinge pin.
Remove the 4 door guide holders from side of the doors and fix them on to the
opposite side.

Replacing the Light

The light is an energy efficient, long life LED. Therefore should not need replacing
throughout the life of the product however if it does it has to be replaced by a
qualified engineer.
14