Commend EEHS9 Kurzanleitung

Handset EE HS9
The handset EE HS9 (robust polycarbonat) can be used for the Duetto series versions EE 980,
EE 980CM, SIP-EE 980 and SIP-EE 980CM.
Mounting
• Connect the cable of the receiver to the appropriate port of the control station.
Note: The connection diagram of the control station is included in the short reference
"D-BZ-EE980" .
• Place the connected receiver as far left on the front side of the control station until it
stays in position on its own.
Latest software and documentation
For current software and documentation visit: www.commend.com
For technical data and system requirements see the respective datasheet.
Disposal and recycling
Equipment with this symbol shall not be disposed of together with household or
commercial waste.
The directive 2012/19/EU on waste electrical and electronical equipment (WEEE) is
applicable in the European Union member states.
Attention
Observe the precautions for handling of electrostatic sensitive devices!
The device may be only installed by authorised engineers.
Manufacturer's reference
This equipment fulfils the requirements of the EU directive 2014/30/EU (EMC).
Therefore this equipment is CE-labelled.
Please keep this description in safe custody!
Dimensions
Dimensions in mm (in), not to scale!
Handset
48 (1.9)
Control station EE 980 with handset
287 (11.3)
Type: D-BZ-EEHS9, Version: 1.1/1016
www.commend.com