Optional Accessories; Plinth Ug 1200; Payment System - Miele PRI 217 Installationsplan

en - Installation and planning notes

Plinth UG 1200

Payment system

32

Optional accessories

Only use genuine Miele spare parts and accessories with this ma-
chine.
Using spare parts or accessories from other manufacturers will in-
validate the guarantee, and Miele cannot accept liability.
The ironer can be raised 100 mm by fitting the optionally available
plinth UG 1200.
This ironer can be fitted with an optional payment system (e.g. for use
in a launderette). Miele Service have to programme a setting in the
machine's electronics and connect the payment system. Miele offer
payment systems for coin-free operation as well as payment systems
with mechanical or electronic coin boxes for specific target groups.
The programming required for connecting a payment system must
be carried out by Miele Service or an authorised Miele Service
Dealer only. A separate electrical connection is not required for a
payment system.
Coin operated ironers must be secured by the side columns to pre-
vent the risk of the machine tipping.