High-Pressure Hose; Description Of The Device; Control Panel - Kärcher HDS 1000 De Steamer Bedienungsanleitung

● Do not touch any hot parts such as the muffler, cylin-
der or cooling fins.
● Never bring your hands and feet near rotating parts.
● Never operate the device in confined spaces.
● Do not use unsuitable fuels as they can be dangerous.
Safety instructions
The following safety instructions apply to the device:
● Observe the respectively applicable national regula-
tions for liquid jet cleaners.
● Observe the respectively applicable national acci-
dent prevention regulations. Liquid jet cleaners must
be tested regularly and the results of the test record-
ed in writing.
● Note that the heating system in the device is classi-
fied as a furnace. Furnaces must be inspected reg-
ularly according to the applicable national
regulations.
● According to the application national regulations,
this device must be initially commissioned by a qual-
ified person when used commercially. KÄRCHER
has already performed and documented this initial
commissioning for you. You can request the docu-
mentation for this from your KÄRCHER partner.
Please provide the part number and works number
of the device when requesting documentation.
● We explicitly state that the application national reg-
ulations require that this device must be inspected
regularly by a qualified person. Please contact your
KÄRCHER partner for this.
● No modifications may be made to the device or ac-
cessories.

High-pressure hose

The following safety instructions apply to the high-pres-
sure hose:
● Use only original high-pressure hoses.
● The high-pressure hose and the spray unit must be
suitable for use at the maximum operating pressure
specified in the technical data.
● Avoid contact with aggressive chemicals.
● Inspect the high-pressure hose daily.
Do not continue using kinked hoses. Do not contin-
ue using the high-pressure hose if the outer wire
mesh layer is visible.
● Do not continue using a high-pressure hose with a
damaged thread.
● Lay the high-pressure hose so that it cannot be driv-
en over or presents a tripping hazard to persons.
● A hose that has been driven over, kinked or subject-
ed to impacts may no longer be used, even if no
damage is visible.
● Store the high-pressure hose in a manner avoiding
mechanical stresses on the hose.

Description of the device

Illustration A
EASY!Lock triple nozzle
1
EASY!Lock spray lance
2
Pressure / quantity regulation
3
EASY!Force high-pressure gun
4
Safety latch of the high-pressure gun
5
Trigger
6
Safety lever
7
EASY!Lock high-pressure hose
8
Oil drain plug (pump)
9
Fuel tank
10
Battery
11
Fuel pump with fuel filter
12
Burner blower
13
Electric starter
14
Manual starter
15
Fuel tank
16
Weed removal electrical box
17
Type plate
18
Water connection with sieve
19
EASY!Lock high-pressure connection
20
Oil filler
21
Pressure gauge
22
Pressure switch
23
Safety valve
24
Pressure tank
25
Burner cover
26
Burner sight glass
27
Nozzle holder
28
Booster heater
29
Solenoid valve
30
Electrical box
31
Oil sight glass
32
High-pressure pump
33
Oil dipstick (motor)
34
Oil drain plug (motor)
35
Detergent suction hose with filter
36
Sieve in the water shortage safeguard
37
Water shortage safeguard
38
Float container
39
Softener tank (DGT)
40
Illustration B
Liquid softener indicator light
1
Fuel indicator light
2
Power switch
3
Illustration C
Detergent dosing valve
1
Illustration D
"Ignition on" indicator light
1
English

Control panel

17