General; Contents Of Box; Safety; Installation And Use - ADE M309800 Bedienungsanleitung

This symbol means: "Consult operating instructions". To achieve accurate
results, read the instructions for use carefully before use and follow all
instructions provided therein. Keep the instructions for use for future reference.
Your mechanical scale made by ADE is a precision instrument and must be treated
accordingly. Please follow the instructions below in order to obtain the best results at all times.

Contents of box

– Mechanical round-dial scale
– Operating manual

Safety

– Handle your scale with care - it is a precision instrument.
– Use the scale on a firm and level surface
– Operate the unit only within the permissible ambient conditions.
– Do not operate the unit in hazardous or unstable environments.
– Clean with a dry cloth, do not use harsh cleaning agents.
– Do not immerse the appliance in water or other liquids.

Zero setting

Before you can use the scale for the first time, you must adjust the zero point manually.
– Place the scale on a flat and solid surface.
– After transport and setting up, the movable parts of the scale must first move to their
respective initial positions. You can accomplish that by operating the scale and stepping
onto the platform and down again several times.
– For setting the zero point, however, the platform must be clear.
– Adjust the scale by turning the dial above the display to the left or right until the pointer
on the dial points exactly to zero.
– The scale is ready for operation now.
You should repeat the procedure from time to time so you can be sure that
you always get the best results. Proceed as described above. This is
particularly important whenever you move the instrument to a new place /
different surface.
5

General

Installation and Use

M309800-210705-Rev003-UM-de-e-fr-it