Makita UR012G Betriebsanleitung Seite 12

Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Danger; be aware of thrown objects.
Warning; Disconnect battery before
maintenance.
Warning: Hot surface. Risk of burns. Do not
touch metal part until cooled.
Wear eye and ear protection.
Noise
2-tooth blade
3-tooth blade
4-tooth blade
Nylon cutting head
Plastic blade
• Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
Cutting tool
Ni-MH
Li-ion
Sound pressure level (L
dB(A)
L dB(A) Uncer-
pA
tainty (K)
dB(A)
82.3 1.7
86.1 0.4
84.3 2.1
79.9 1.8
82.7 0.6
12 ENGLISH
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
) Sound power level (L
pA WA
dB(A)
L dB(A) Uncer-
WA
tainty (K)
dB(A)
96.2 0.8
99.4 0.6
97.7 2.1
91.6 1.5
92.4 1.1
) Applicable
standard
ISO22868
(ISO11806-1)
ISO22868
(ISO11806-1)
ISO22868
(ISO11806-1)
ISO22868
(ISO11806-1)/
EN50636-2-91
ISO22868
(ISO11806-1)/
EN50636-2-91