Assembly - MAXXMEE SP21004-00000 Bedienungsanleitung

Foldable rowing machine
■
Children must be supervised to
ensure that they do not play with the
device.
■
Keep the fastening and packaging
materials away from children and ani-
mals. There is a danger of suffocation.
■
If you have cardiovascular or ortho-
paedic problems or uncertainties
regarding health (risk group), consult
a doctor before using the device. If
necessary, coordinate the training
programme with your doctor.
■
Pregnant women should not use the
device or only after consulting their
doctor.
■
Be careful with your fi ngers and feet
when unfolding and collapsing the
training device. There is a danger of
crushing!
■
Batteries can be deadly if swallowed.
Make sure that the training computer
and the battery are out of the reach of
young children and animals. If a bat-
tery is swallowed, immediate medical
attention must be sought. There is a
danger of burns from battery acid.
■
If a battery leaks, do not allow your
skin, eyes and mucous membranes
to come into contact with the battery
acid. If you touch battery acid, rinse
the affected areas with abundant clear
water straight away and seek medical
assistance immediately. There is a
danger of burns from battery acid.
■
Before each use, check all parts, es-
pecially the screws of the seat and the
handlebar, for tightness and wear.
05854_Inlay_DE-EN-FR-NL_A5.indb 13 05854_Inlay_DE-EN-FR-NL_A5.indb 13
NOTICE – Risk of Damage to
Material and Property
■
Use and store the device only in
closed rooms.
■
No liquid must get into the training
computer. Never immerse it in water!
■
Take the battery out of the training
computer if it is dead or if you will not
be using the device for a prolonged
period. This will prevent any damage
caused by leaks.
■
Remove a leaking battery from the
training computer immediately and
clean the contacts.
■
Protect the device from: extreme
temperatures, strong temperature
fl uctuations, persistent moisture,
wet conditions, direct sunlight and
impacts.

ASSEMBLY

Follow these assembly instructions step
by step to prevent any errors during set-
up and subsequent use. When screwing
the parts together, fi x the nuts with the
spanner supplied.
1. Place all parts carefully on the fl oor. To
be on the safe side, place a protective
fi lm or blanket underneath the parts
to prevent any damage to delicate
fl oor coverings.
2. Lift the connecting rod (4) into the
vertical position.
Picture B
3. Insert the handlebar (1) into the
fi tting on the connecting rod (4). The
angular holes in the handlebar should
point upwards
4. Screw two screws M8 x 35 into the
holes from above.
5. Fix the handlebar from below with
two bent washers Ø 8 and two locking
nuts M8. Screw everything handtight.
EN
13
03.09.2021 13:40:12 03.09.2021 13:40:12