Loctite RC18 Bedienungsanleitung Seite 9

2 Description
14
14 Bottle Nesting Block
For fixing 250 ml and 500 g bottles aligned
correctly to the level sensor.
15 Button
Button for the storage of the new values set for
the dispensing time [s].
When the indication of the dispensing time [s] in
the digital display blinks, the indicated
dispensing time is stored by pressing button
and the display stops blinking.
16 Button
Button for filling the product feedline. In both
modes, the product is dispensed as long as
button is pressed.
– In time-controlled mode, the dispensing time is
not changed.
17 Buttons
Buttons for changing the dispensing time for a
dispensing sequence.
When button
of the dispensing time [s] in the digital display
begins to blink. The dispensing time is
adjustable from 0.01 to 99.9 s.
Buttons for switching from time controlled mode
to continuous mode.
With the simultaneous pressing of the buttons
for more than 0.5 seconds, an operating mode
change takes place to the Continuous mode. In
the display, "con" appears. The lighting of the
LED "CONT." indicates Continuous mode.
During dispensing, the elapsed dispensing time
is indicated in the digital display beginning each
time with 0.00 s. The last dispensing time
remains displayed until the next start.
– Switching back to time controlled mode
without storage of the dispensing time by
renewed pressing of button
LED extinguishes. In the digital display, the
dispensing time is blinking.
– Switching back to time controlled mode with
storage of the dispensing time by pressing
button . The LED extinguishes. The
indicated dispensing time is stored.
18 Digital Display
Three-figure Display of the dispense time [s].
19 LED "CONT"
The lighting of the red LED "CONT" indicates
Continuous mode.
or is pressed, the display
or . The
9