Please Observe The Following; Emphasized Sections; Items Supplied; Field Of Application (Intended Usage) - Loctite Rc18 Bedienungsanleitung

1

Please observe the following

1.1

Emphasized Sections

Warning!
Refers to safety regulations and requires safety measures that protect the operator or
other persons from injury or danger to life.
Caution!
Emphasizes what must be done or avoided so that the unit or other property is not
damaged.
Notice
Gives recommendations for better handling or adjustment of the unit during operation as
well as for service activities.
The numbers printed in bold in the text refer to the corresponding position numbers in the
illustration on page 8-9.
• The point emphasizes an instruction step.
Instruction steps in the illustrations are
indicated with arrows.
When several instruction steps are
indicated in an illustration, the shading of
the arrow has the following meaning:
Black arrow
Grey arrow
White arrow
1.2

Items Supplied

– Integrated Dispense System
with Level Sensor, Type 97009,
Order No. 215845
– EQ RC18 Integrated Dispense System
LP with Level Sensor,
Order No. 2260508
Notice
As a result of technical development, the illustrations and descriptions in this instruction
manual can deviate in detail from the actual unit delivered.
1.3

Field of Application (Intended Usage)

The Integrated Dispense System is suitable for the exact application of LOCTITE
products at manual workstations such as in workshops, laboratories and industrial
installations. It is designed for a product application position.
– The Integrated Dispense System 97009 is equipped with a precision pressure
regulator 0-4 bar (0-58 PSI) and a low level sensor
– The Dispenser RC18 is equipped with precision pressure regulator 0-0.7 bar
(0-10 PSI) and a low level sensor.
With the Integrated Dispense System, anaerobic, UV curing and cyanoacrylate
adhesives can be dispensed.
The capacity of the integrated reservoir is:
– 500 gr. bottle for CA Products
– 250 ml bottle for Anaerobics
– Bottle with a ø 124 mm and
= 1 st step
= 2 nd step
rd
= 3 step
or
– Tube "Silicone-free Grease"
– Drip cup (3)
– Pneumatic Tubing Ø 6 mm, length 2 m
– Reservoir Fitting
– Bottle nesting basket
– Power cord
– Operating manual
– 1 lb. bottle
– 1 Liter bottle
– 2 kg bottle with a height of 250 mm
®
5