ENGLISH
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Lock-off button
2-2. Switch trigger
3-1. Sprocket cover
3-2. Knob
4-1. Cutter
4-2. Guide bar
4-3. Arrow
5-1. Spring
5-2. Sprocket
5-3. Boss
SPECIFICATIONS
Chain speed per minute (min
Length of guide bar
Saw chain
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
・
Read instruction manual.
・
Wear eye protection.
・
Wear ear protection.
・
Wear a helmet, goggles and ear
protection.
・
Use appropriate protection for foot-leg
and hand-arm.
・
Do not expose to rain.
・
Hold the saw with both hands while
working! One-handed use is extremely
hazardous!
・
This saw is to be used by properly
trained operators only.
・
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
Explanation of general view
6-1. Spring
6-2. Guide bar
6-3. Boss
7-1. Sprocket cover
7-2. Hook
7-3. Hole
11-1. Oil tank cap
11-2. Oil inspection window
11-3. Oil tank opening
12-1. Tip guide
13-1. Lower guide
17-1. Battery cartridge
17-2. Scabbard (chain cover)
Model
-1
)
Type
Pitch
No. of drive links
Overall length
Net weight
Rated voltage
BUC121
4.8 m/s (290 m/min)
422mm
2.4 kg
D.C. 14.4 V
END005-2
Intended use
The tool is intended for cutting lumbers and logs.
For Model BUC121
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-13:
Sound pressure level (L
Uncertainty (K) : 2 dB(A)
The noise level under working may exceed 85 dB (A).
5
22-1. Push nut
22-2. Slotted bit screwdriver
23-1. Filter
25-1. Filter
26-1. Push nut
27-1. Sprocket
27-2. Locking ring
28-1. Locking ring
28-2. Sprocket
28-3. Washer
29-1. Limit mark
30-1. Brush holder cap
30-2. Screwdriver
BUC122
5.0 m/s (300 m/min)
115 mm
25 AP
1/4"
42
422mm
D.C. 18 V
electronic
equipment
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
environmentally
recycling facility.
) : 84.0 dB(A)
pA
Wear ear protection.
2.5 kg
and
its
compatible
ENE031-1
ENG101-2