Telestar DIRA S 20C Bedienungsanleitung Seite 124

7. SETTINGS
Activate the alarm clock via the Status line.
In the next line, set the time for the alarm. Use the number pad on
the remote control or the knob on the device.
Your entries must be confirmed by pressing the
ENTER button.
Set the repetition intervals in the Date line.
You can decide whether the alarm should be activated
at the set time once, daily, on weekdays
or on weekends only.
In the next line,set the volume for the alarm.
In the Beep line, you can decide whether the alarm should sound a
tone or if the device should switch on an internet radio station or a
DVB-C station when the alarm is triggered.
Please note that at least one favourite station must be saved for
the selected reception mode if choosing the DVB-C or internet
radio station option.
To stop an alarm, press the STANDBY button on the remote con-
trol or the device.
To activate the snooze function, press the knob on the device
while an alarm is sounding.
This pauses the alarm for 5 minutes.
The alarm is reactivated after 5 minutes.
124 EN