Safety; Intended Use - WIKA 732.14.100 Betriebsanleitung

2. Safety

2. Safety
WARNING!
Before installation, commissioning and operation, ensure that the
appropriate instrument has been selected in terms of measuring
range, design and specific measuring conditions.
Check the compatibility with the medium of the materials subjected
to pressure!
In order to guarantee the measurement accuracy and long-term
stability specified, the corresponding load limits must be observed.
Non-observance can result in serious injury and/or damage to
property.
Further important safety instructions can be found in the individual
chapters of these operating instructions.

2.1 Intended use

These instruments are used for measuring pressure in hazardous areas of indust-
rial applications.
Suitability for use in accordance with model ID
See chapter 1 for the assignment of model ID to model.
Application
For gaseous and liquid aggressive media that are not highly viscous or crystalli-
sing, also in aggressive environments
Pump monitoring and control
Filter monitoring
Level measurement on closed vessels
For measuring locations with a high differential pressure overload and/or high
working pressures (static pressures)
For gaseous, liquid, contaminated, viscous and aggressive media, also in ag-
gressive environments
The instrument has been designed and built solely for the intended use described
here, and may only be used accordingly.
WIKA operating instructions pressure gauge model 7 per ATEX
EN
Model
ID
A B

 
 
 


5