IKEA LIVSGNISTA AA-1147127-3 Bedienungsanleitung Seite 18

ENGLISH ENGLISH
- tighten screw to reduce the flame height
(-);
- loosen screw to increase the flame height
(+).
The adjustment must be performed with the
tap in minimum gas setting position (small
flame ) .
- The primary air of the burners does not
need to be adjusted.
- At this stage, light up the burners and
turn the knobs from max position
minimum position
stability.
Upon completion of adjustment, reseal
the work surface using sealing wax or an
equivalent material.
GB
Ensure that the installation and gas
connections are performed by a qualified
technician, following the manufacturer's
instructions and in compliance with current
local safety regulations.
to
to check flame
14 18