Eibenstock EBM 352/3 Originalbetriebsanleitung Seite 20

Application for Indented Purpose
The diamond core drill EBM 352/3 is indented for professional use and may
be used by instructed personnel only.
With the appropriate wet drill bits, the machine may be used for wet drillings
only, e. g. in concrete, stone and masonry.
It may be used with a suitable diamond drill rig only.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction and follow the instructions
contained strictly. Additionally, the general safety
instructions of the leaflet supplied with the tool must be
observed. Prior to the first use, the user should absolve a
practical training. Save all warnings and instructions for
future reference.
If the mains cable gets damaged or cut during use, do not
touch it, but instantly pull the plug out of the socket.
Never use the tool with a damaged mains cable.
When drilling in ceilings or walls make sure you will not
cut through electrical mains, gas or water pipes. Use
metal detection systems if needed.
Prior to the start of your work, consult a statics specialist
to determine the exact drilling position.
If drilling through ceilings, secure the place below,
because the core may fall downward.
Pay attention that the tool is not exposed to directo rain.
Do not use the tool in an environment with danger of explosion.

Do not use the tool standing on a ladder.

Do not drill in asbestos-containing materials.

Never carry the tool at its cable and always check the tool, cable and

plug before use. Have damages only repaired by specialists. Insert the
plug into the socket only when the tool switch is off.
Modifications of the tool are prohibited.

The machine should only work under supervision of sbd. Plug and switch

the machine off if it is not under supervision, e. g. in case of putting up
and stripping down the machine, in case of voltage drop or when fixing
or mounting an accessory.
Switch the machine off if it stops for whatever reason. You avoid that it

starts suddenly and not under supervision.
Do not use the machine if a part of the housing is damaged or in case of

damages on the switch, the cable or plug.
20