Herunterladen Inhalt Inhalt Diese Seite drucken

Parkside PSHL 2 D1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung Seite 28

Automatik-schweisshelm
Vorschau ausblenden Andere Handbücher für PSHL 2 D1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Safety instructions
the eye protection exhibits the
necessary scale number.
Using the product against
splashes (insufficient protec-
tion) – always check whether
the correct protective effect is
present.
Using the product against large
dust particles (injury, accident).
The eye protection equipment
must only be used for the work
described in the operating
instructions. Any deviation from
the instructions in the operating
instructions can result in injuries
or accidents.
Using damaged products
(insufficient protection) – prior
to each use check the weld-
ing helmet for damage and
durability.
Improper use of the eye pro-
tection (injury, accident).
The eye protection device
must only be used for the work
described in the operating
instructions. Any deviation
from the instructions can result
in injuries or accidents.
This device may be used by
children aged 16 years and
older, and by persons with
reduced physical, sensory or
mental capacities, or a lack of
experience and knowledge,
if they are supervised or have
28
GB/IE
been instructed in how to use
the device safely and under-
stand the dangers that may
arise when using it. Do not
allow children to play with the
device. Cleaning and day-to-
day maintenance must not be
performed by children without
supervision.
The welding helmet with
auto-darkening is not suitable
for laser and autogenous
welding.
Never place the welding
helmet on hot surfaces.
Do not open the welding
helmet under any circum-
stances. Do not carry out any
repair work or alterations to
the welding helmet. This work
must only be carried out by
trained specialist personnel.
Before any welding work,
please make sure that
you have adjusted the
auto-darkening.
The safety visor must not be
opened. It protects the filter
from dirt and damage.
If the filter does not darken
automatically, stop the weld-
ing work immediately and
contact the manufacturer.
Only use the welding helmet
at temperatures between
-5°C and +55°C.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis